Outdoor led display screens, as the overlord of the outdoor large-screen display industry, are used by people in various countries around the world in the construction of outdoor advertising. If you want the outdoor LED display to work stably for a long time, at the beginning of the construction, the LED display must be reinforced with various methods to ensure that the phenomenon of tilting and falling towers will not occur easily in the later stage.
One of the reinforcement methods of outdoor led display: expand the foundation
At the beginning of construction, at the same time, concrete or just entered the Shanghai-Nanjing map to increase the force-bearing area of the outdoor led display base to ensure that there will be no tilt caused by the excessive weight of the led display screen or the excessive wind.
Reinforcement method two: digging a hole
Dig a hole on the original foundation and then fill it with concrete, so that the foundation is firmly and stable on the ground.
Reinforcement method 3: Piling
At the beginning of construction, piles were driven and concrete was poured to further strengthen the foundation when the foundation was made.
Reinforcement method 4: Pouring glue reinforcement
Using chemical grouting, the grout is injected into the soil under the base, and the loose soil and the base are solidified. It is also one of the indirect ways to extend the base, and it can also achieve the purpose of reinforcement.
The reinforcement of the outdoor led display is not only the reinforcement of the foundation, but also the steel structure of the outdoor display requires special attention. The reasonable design of the steel structure can ensure that it supports the led display, and it can also ensure that it will not be used during long-term use. Deformation, so that the outdoor display can work stably.
