כיום, יותר ויותר אנשים או ארגונים משתמשים במסכי תצוגת LED צבעוניים-בהבחנה מלאה-, ובעיות מסוימות במסך התצוגה מתגלות בהדרגה בתהליך השימוש. מצד אחד, בעיות אלו נובעות ממחסור בחומרים מיצרנים גרועים, ומצד שני הן נובעות מחוסר ניהול נכון בעבודה רגילה. אז איך אנחנו צריכים להשתמש בו כדי להאריך את חיי השירות של תצוגת LED?
First of all, when we usually turn on the display, we should ensure that the control computer has been successfully turned on and then turn on the LED display screen. Of course, there is a sequence when closing the device. Generally, the display screen is turned off first, and then the computer is turned off. The second is the use environment of the screen, try not to be in an environment with rain or high humidity with water vapor. Excessive humidity can slowly erode the internal components of the full-color display, causing permanent damage. If water enters accidentally, be sure to turn off the power and contact the relevant maintenance personnel immediately, and do not continue to work after the water has entered. Then there is the cleaning problem of the display screen. The screen body is exposed to the air for a long time. Too thick dust will not only greatly reduce the display effect, but also cause damage to the circuit board, so regular cleaning is very important. When cleaning, we can use alcohol to wipe, or use a brush, vacuum cleaner, etc. to remove dust. Do not directly wipe the screen with a damp cloth. Next is the frequency of use of the LED display. It is best to rest for more than 2 hours a day. It is guaranteed to be turned on once a week in rainy weather. Generally, it is used once a month for more than 2 hours to avoid being damp and unable to use. Finally, it is necessary to regularly maintain the line of the LED display screen for damage. If there is a problem, it should be replaced and repaired in time.
